Address Range - Enter the Start Address and End Address for the IP addresses in the same address range.ĮxtremeCloud IQ - Site Engine only allows a subnet search of a 16-bit mask or higher when discovering devices.Seed Address - Enter the seed address for CDP, LLDP, EDP, SONMP-compliant devices.When using dotted decimal notation, the network bits must be contiguous ones and the host bits must be contiguous zeros. The Subnet Mask must use CIDR or dotted decimal notation.A / is required between the IP Address and Subnet Mask.The IP Address must be one of the hosts in the subnet.Subnet - Enter the IP address and subnet in the following format: IP Address/ Subnet Mask.Enter the Subnet, Seed Address, or Start Address and End Address, depending on the Discover Type you select.Select Subnet, Seed Address, or Address Range in the Discover Type drop-down list.Select the Add button in the Addresses list to open the Add Address window.Select the Site tab in the right-panel.Select the site from the left panel to which you are adding the devices.Select Sites from the left-panel drop-down list.
For additional information on discovering devices using ZTP+, see ZTP+ Device Configuration in ExtremeCloud IQ - Site Engine. ZTP+ enabled devices use a different device discovery process. To discover devices, begin by using the Site tab to configure the default settings that apply to devices you add to ExtremeCloud IQ - Site Engine and then configure individual devices and add them to the ExtremeCloud IQ - Site Engine database via the Discovered tab. When adding an ExtremeXOS/Switch Engine device in ExtremeCloud IQ - Site Engine, enter the following commands in the device CLI:Ĭonfigure snmpv3 add community "private" name "private" user "v1v2c_rw"Ĭonfigure snmpv3 add community "public" name "public" user "v1v2c_rw"
You can then save the discovered devices to the ExtremeCloud IQ - Site Engine database, where they are displayed in the left-panel tree on the Network > Devices tab. Seed addresses for CDP, LLDP, EDP, or SONMP-compliant devicesĭiscover automatically explores the defined network segment and creates a list of discovered devices.You can discover new devices based on the following criteria:
Cannot print cloud outliner how to#
For additional information on creating maps, see How to Create and Edit Maps.įor a list of instructions outlining the initial setup of your network in ExtremeCloud IQ - Site Engine, see ExtremeCloud IQ - Site Engine Initial Configuration Checklist. ExtremeCloud IQ - Site Engine allows you to discover the devices of your network and add them to the ExtremeCloud IQ - Site Engine database.īefore discovering devices, create the maps to which they belong.
0 kommentar(er)
